Your browser does not support JavaScript


  CALL US: 1 (888) 261-3076     CONTACT US


Enlarge Image
  Jokab RT9 Safety Relay, 24 Volt Safety Relay, 22.5mm Wide

Product Photos
right left

Product Description
Jokab RT9 Safety Relay, 24 Volt Safety Relay, 22.5mm Wide

“A fault in the hardware or the software of the control system must not lead to a hazardous situation.” This is the declaration of the EU’s Machinery Directive and EN 2006/42/EG under the heading 1.2.1 “Safety and reliability of control systems”. The directive implies that no person should be put at risk if for example, a relay sticks or if a transistor or two electrical conductors short-circuit. Supervise safety devices A safety relay will fulfill these requirements with inputs that are checked for short-circuits and dual redundant circuits that are checked at each operation. This can be compared to the dual brake circuits in a car. If one of the circuits is faulty the other will stop the car. In a safety relay there is an additional function which only allows a machine to start if both circuits are ok. The safety standard describes various safety categories depending on the level of risk and application. One single universal relay with selectable safety categories solves this.

Safe stops and reliable restarts A safety relay will fulfill these requirements with inputs that are checked for short-circuits

Dual stop signals when the gate is opened… Entering or putting a hand or limb into a hazardous area, must cause all machines that can cause a personal injury to stop safely. Many serious accidents occur when machinery is believed to have stopped but is in fact only pausing in its program sequence. The safety relay monitors the gate interlock switch, the cables and gives dual stop signals. Timed reset when you cannot see the entire risk area… Sometimes a double reset function is necessary to make sure that no one is left behind in the risk area. First, after ensuring no other person is inside the hazardous area, the prereset button must be activated, followed by the reset button outside the risk area within an acceptable time period e.g. 10 seconds. A safety timer and a safety relay can provide this function

Supervised reset when there can be a person within the risk area… Make sure that nobody is within the restricted area when activating the reset button. A supervised reset button must be pressed and released before a reset can occur. Many serious accidents have been caused by an unintentional and unsupervised reset. Automatic reset for small hatches… Where body entry is not possible through a hatch, the safety circuit can be automatically reset. The safety relays are reset immediately when the hatch interlock switch contacts are closed.

Weight .5 lbs
Dimensions 6 x 6 x 6 in

You Might Also Like


WIegmann RSC

Wiegmann SC1

Wiegmann FBF

Wiegann B161

EXM 5300ES36

Marathon 150

Lovato PSL1M


Baco LBX1061

Wiegmann RSC

Hammond SP25


Subscribe for our newsletter program.

Credit/Tax Apps
Sell On Midwest
Government Buyers


Order Policy
Shipping Terms
My Account

Midwest Equipment
6555 Corporate Drive, Cincinnati, OH 45242
1 (888) 261-3076
Message Us

Follow Us on FacebookFollow us on TwitterFollow us on LinkedInBlog